Tungsten carbide rod

Ground and un-ground tungsten carbide rods with good quality,competitive price.Mainly used with milling cutters and drill bits.

Tungsten carbide rods

1.The rods are shaped by extruder machine.moulding press machine or Cold isostatis press machine.

2.The rods are sintered by Integrated vacuum furnace or high-pressure sintering furface,by this sintering,the rods are with high overall performance and no pores.

3.Ungrounded or grounded rods are both available,any other tolerance requested rods also can be offered.Rods with chamfer or without chamfer are both available.The common diameter tolerance can be offered in

H6,H7,h6,h7,-0.005 etc.

4.The rods are suitable for the processing of general steel,cast iron,stainless steel,heat-resistant steel,nickel-based and titanium alloys and other materials.Recommended for twist bits,end mills,taps,gun drills and other general tool

materials.

5.Rods with diameters from 0.3 to 40 mm can be provied with lengths below 400mm,and we can also provide rods according to your drawing request.

6.Sizes can be 0.2X330,2X330,3X330,4X330,5X330,6X330...or 60x330mm.

7.Grades can be YG6.YG8.YG10.YG11.YG12.YG15.YL10.2,YU12,YU06 etc.

Material Grades of tungsten carbide rods

Grades	Hardness (HRA)	Density (g/cm3)	T.R.S. (N/mm2)	ISO
YG6	≥91	14.9	≥1900	K20
YG6A	≥92	14.9	≥1810	K10
YG6X	≥91.5	14.9	≥1860	K10
YG8	≥90	14.8	≥2080	K20
YG8C	≥89	14.8	≥2020	K25
YG10	≥88.5	14.3	≥2300	K40
YG10X	≥92	14.45	≥3400	K40
YG15	≥87	13.9	≥2580	K40
YG20	≥85.5	13.5	≥2750	K40
YG20C	≥84.5	13.5	≥3000	K40
YS2T	≥92	14.4	≥2500	M20
YL10.2	≥91.5	14.5	≥3100	K20-K30
YN6	≥88.5	14.5	≥1800
YN8	≥87.5	14.3	≥2000